Aerodynamics Design Carbon Filter Dust Mask Easy Breathing /
Speaking
Descriptions
The mask of FFP1V Dust Mask is light and comfortable. The internal
nosepiece is made of velvet/sponge double-layer. There are no
exposed metal components; the external nosepiece used to adjust the
mask on the face is metal coated. Structure and materials are long
lasting and avoid the collapse in humid environments.
Advantages
1.The disposable particulate respirator is designed to help provide
quality, reliable respiratory protection for the professional.
2.Advanced electrostatically charged microfibers which make
breathing easier and cooler.
3.The proprietary Exhalation Valve reduces heat build-up inside the
respirator to help keep the wearer more comfortable.
4.The soft inner material provides added comfort while the soft
nose foam and adjustable nose clip help provide a custom fit.
5.These features are designed to enhance user comfort and help
increase wear ability.
Certification
| CE Standard for Disposable Respirators |
| EN: 149:2001 + A1:2009 |
| Distinguish | Filter Efficiency | Penetration | Resistant |
| FFP1 NR | ≧80% | < 20% | < 21mmH2O |
| FFP2 NR | ≧94% | < 5% | < 24mmH2O |
| FFP3 NR | ≧99% | < 1% | < 30mmH2O |
This product has been tested according to the following European
Standard:
- EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering
half masks to protect against particles. Requirements, testing,
marking.It complies with European Regulation (EU) 2016/425 on
Personal Protective Equipment (PPE).Category III.
- EU type examination certificate (module B) issued by BSI , notified
body n°0086.The PPE is subject to the conformity assessment
procedure based on internal production control plus supervised
product checks at random intervals (Module C2) set out in Annex VII
under surveillance of BSI , notified body n°0086.
Material of each layer
1st layer : Protective pp spun-bonded non-woven
2nd layer : Active carbon filter(MX-3006)
3rd layde : FFP1 melt blown filter(have filter efficiency level of
80%)
4th layer : Shaped needle punched cotton
FAQ
Q: How does your factory control the quality?
A: All manufacturing are absolutely base on the pre-production
samples. Meanwhile, we have a complete after-sales system.
Q: Could you embossed printing the logo on the face mask?
A: Yes, we can embossed printing the logo on the surface of face
mask, OEM production is ok.
