Conical Shape Activated Carbon Pollution Mask FFP2 Valved With
Adjustable Nosepiece
1 . Descriptions
【High filtration】- High Technology Filters Almost 98% Of Airborne
Particles Dust, Germs, Seasonal Allergies, Smoke, Car Exhausted
Gas, PM 2.5 Pollution Ash.
【Designed for comfortable on-the-job protection】- Disposable Mask
Is Lightweight, Humidity-resistant, Latex-free, Adjustable Metal
Nose Strip And Comfortable Elastic Headband.
【Available 24/7】- Our Mask Can Be Used All Year In Any Weather
Which Keeps You Safe From Fog, Smog, Dust, Germs, Bacteria,
Viruses, Air Pollution, Allergens, And Humidity Thus Keeping You
Healthy And Safe From Many Diseases.
【Size】- One Size Fits Most; Universal Contoured Design Provides A
Snug Fit To Most Facial Profiles.
2 . Certification
This product has been tested according to the following European
Standard:
| CE Standard for Disposable Respirators |
| EN: 149:2001 + A1:2009 |
| Distinguish | Filter Efficiency | Penetration | Resistant |
| FFP1 NR | ≧80% | < 20% | < 21mmH2O |
| FFP2 NR | ≧94% | < 5% | < 24mmH2O |
| FFP3 NR | ≧99% | < 1% | < 30mmH2O |
- EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering
half masks to protect against particles. Requirements, testing,
marking.It complies with European Regulation (EU) 2016/425 on
Personal Protective Equipment (PPE).Category III.
- EU type examination certificate (module B) issued by BSI , notified
body n°0086.The PPE is subject to the conformity assessment
procedure based on internal production control plus supervised
product checks at random intervals (Module C2) set out in Annex VII
under surveillance of BSI , notified body n°0086.
3 . How to use?
- Cup respirator in one hand with nosepiece at fingertips,allow
headbands to hang freely below hand.
- Hold respirator under chin,with nose piece up
- Locate the upper strap across the crown of the head and the lower
strap below the ears.
- Strap must not be twisted
- Using both hands,mould nose clip to the shape of the lower part of
the nose to ensure a close fit and good seal.Pinching the nose clip
using only one hand may result in less effective respirator
performance.
- The seal of the respirator on the face should be fit-checked before
entering the workplace.
- If the user feels the bottom strap is too loose and it is not
possible to achieve a satisfactory fit of the mask a knot can be
tied in the strap.
4. FAQ
Q: Can you provide free samples?
A: All samples are provided freely, it will takes3-5 days to
prepare the samples.
Q: How does your factory control the quality?
A: All manufacturing are absolutely base on the pre-production
samples. Meanwhile, we have a complete after-sales system.
Q: Could you embossed printing the logo on the face mask?
A: Yes, we can embossed printing the logo on the surface of face
mask, OEM production is ok.
5. More pictures
